Cleanroom Fogger reviewed with Cascade Impactors and Water Condensation Particle Counters using PSL Spheresphoenixadmin2020-09-10T17:35:11-06:00
Applied Physics, Inc. (ÅP™) can be reached at (719) 428-4042 and has been in business since 1992 providing aerosol impactors, such as the MOUDI Cascade Impactor and Nano-MOUDI impactor to Science Universities and Government laboratories. Cleanroom foggers and Di Water foggers are
provided to visualize airflow and air turbulence in Semiconductor fabs and pharmaceutical labs. The Model 2300 NPT-2 PSL and Particle Deposition System
is used by Semiconductor Device manufacturers to calibrate the size response curves of KLA-Tencor SP1, SP2 and SPX Wafer Inspection Systems; as well as Topcon, Hitachi
and ADE Scanning Surface Inspection Systems. 2300 NPT-2E Edge Deposition tools deposit Si, SiO2, Al2O3, TiO2, Si3N4, Ti, W, Cu and Tantalum particles on the silicon
wafer edge and bevel to calibrate Rudolph, KLA-Tencor and Raytex edge inspection tools. Metrology managers can reduce wafer particle contamination by investigating
particle migration from the wafer edge to the device chip on the silicon wafer. 2300 NPT-2W WET Particle Deposition tools bond process particles onto the wafer surface
with a variety of wet liquids.
Clean Room Foggers and UltraPure Foggers support USP797 guidelines for Insitu airflow pattern and turbulence analysis. Microbial Air Samplers monitor unwanted fungal and bacterial growth in ISO 5 Filling Lines, Barrier Isolators and ISO 7 -9 areas.
EMTEK Microbial Air Samplers provide superb Bacterial and Fungal sampling to monitor ISO 5, ISO 7 and ISO 9 Pharmaceutical production for microbiological contamination with much higher capture efficiency.