AP35 Ultrapure Cleanroom Fogger
$0.00
Smoke Studies and AP35 Ultrapure Fogger
In 2001 portable cleanroom foggers were introduced and now the AP35 LN2 fogger is a significant advancement with 3X more ultrapure fog volume, adjustable fog volume control, adjustable airflow control and wireless remote control. The AP35 uses liquid nitrogen and deionized water, sterile water or Water for Injection to create a very dense, ultra pure fog to provide superb visualization of airflow patterns, flow direction, turbulence and dead zones for up to 70 minutes in clean rooms, ISO suites, sterile rooms, barrier isolators and medical rooms. The AP35 provides 5 cubic meters ultrapure fog per minute with about 571 ml fog density each minute, superb for visualizing airflow and turbulence. More than 20-30 feet of air flow visualization is provided in the clean room using two 80mm fog outputs. 3D airflow modeling is accomplished very well and no contamination is created and no clean up of any kind is required after visualizing the airflow. The AP35 ultrapure LN2 fogger supports airflow visualization guidelines as defined by USP797 Insitu Airflow Analysis, ISO 14644-3, B7; Federal Standards 209E and its replacement ISO Standard 14644-1 and 14644-2.
Related products
- Applied Physics Companies
- AI & ML Technologies
- Åpplied Physics LED
- Åpplied Physics Medical
- Åpplied Physics Pharmaceuticals
- Åpplied Physics Robotics
- Medical Billing
- CRF6 Clean Room Fogger
- AP35 Ultrapure Cleanroom Fogger
- Portable Glycol Fogger
- Decontamination Foggers
- DF2S Decontamination Fogger
- PBF-24- Portable Backpack Fogger
- PBF-48- Portable Backpack Fogger
- WMF- Wall and Table Mounted Sanitize and Decontaminate Fogger
- WMF2- Wall and Table Mounted Sanitize and Decontaminate Fogger
- Air Samplers
- P100 Portable Air Sampler
- Controllers
- V100 Controller
- Diffusers
- High Pressure Diffuser
- Filtered High Pressure Diffuser
- Wafer Standards
- PSL Wafer Standard
- Silica Wafer Standard
- Microspheres
- Polystyrene Microspheres
- 2000 Series Uniform Polymer Particles, 5 μm-40 μm
- 3000 Series Nanosphere, 20 nm-900 nm
- 4000 Series Monosized Beads, 1–160 μm
- Polystyrene, 100 nm-100 μm
- Polystyrene 3k-4k
- Polystyrene- NIST SRM, 60.4 nm-895 nm
- Polystyrene-Surf-Cal, 47 nm-3.04 μm
- Polystyrene Dry Powder Standards 3 μm-10 μm
- Silica and Glass
- Silica Size Standards, 40 nm-2 μm
- Filter Test
- PSL Size Standards- Hepa Test, 30nm-3.1μm
- PSL Size Standards- Hepa Check, 0.12 μm-0.30 μm
- PSL Size Standards- OptiBind, 0.1 μm-2.5 μm
- Polystyrene Puffs
- Polystyrene Puffs- Pallet (90 Cubic Ft)
- Graphene
- Water Technologies
- AI & ML Technologies