Last Updated: November 5, 2026
Quick Summary
An air-filtration inspection finding requires review of the test method, instrument records, operating conditions and acceptance criteria. Filter leakage, airflow performance and particle classification address different questions. Qualified personnel should establish the cause before specifying corrective work.
- Distinguish aerosol generation from verification of the test challenge.
- Have qualified personnel review test setup, instrument condition and supporting records.
- Airflow visualization and particle counts answer different questions; neither alone proves compliance.
- Interpret airflow and differential-pressure changes in their operating context; do not assume a single cause.
This is a review and purchasing checklist, not a filter-testing or repair procedure. Use the applicable approved method and qualified personnel. ISO 14644-3 describes cleanroom test-method scope; consult the applicable full method for requirements.
Table of Contents
- Why Cleanroom Air Filtration Fails During Inspections
- Cleanroom HEPA Filter Integrity Testing: Separating Filter Defects From HVAC Faults
- Cleanroom Airflow Visualization and Particle Monitoring: Reading the Evidence Together
- Where to Go From Here
- Frequently Asked Questions
Why Cleanroom Air Filtration Fails During Inspections
Review the reported finding against the applicable test method, filter and housing documentation, installation records and operating conditions. A reading at a particular location does not by itself establish when or why a defect occurred.
Cleanroom HEPA Filter Integrity Testing: Separating Filter Defects From HVAC Faults

An aerosol generator supplies challenge aerosol; it does not by itself verify the concentration or distribution reaching a filter. Have the qualified test team confirm that the generator, aerosol photometer and approved method suit the system and intended test. Interpret recorded measurements with the test conditions rather than inferring root cause solely from the location of a reading. Manufacturer generator example; photometer measurement example. These manufacturer examples do not establish availability through Applied Physics.
Cleanroom Airflow Visualization and Particle Monitoring: Reading the Evidence Together
Airflow visualization shows flow patterns. Conventional light-scattering particle counters measure particle number concentrations by size, not particle identity or microbial viability. Neither result alone establishes cleanroom performance. The Kanomax CRMS can integrate particle and environmental measurements; confirm included sensors, parameters, data handling and configuration in the quotation. ISO particle-classification scope; Kanomax CRMS information.
Cleanroom Monitoring System – Model CRMS →
|
Finding |
Review question |
Records to discuss |
|---|---|---|
|
Reported reading near gasket or frame |
Does the test evidence distinguish an installation issue from other causes? |
Approved method, instrument checks and installation records |
|
Reported reading at filter media |
What evidence supports interpretation of the reported location? |
Test records and filter condition/history |
|
Reported airflow or differential-pressure change |
Were operating conditions and measurement methods comparable? |
Baseline, instrument checks and operating-condition records |
Where to Go From Here
Applied Physics lists the Kanomax Cleanroom Monitoring System. Request current configuration, pricing and availability with your intended application and documentation requirements. Have qualified personnel confirm suitability before purchase or use.
Frequently Asked Questions
What is the difference between HEPA filter integrity testing and airflow visualization?
Integrity testing and airflow visualization address different questions. A fogger does not certify a HEPA filter or cleanroom. Review results alongside particle monitoring and consult your qualified team and approved procedures.
What should a team review after a cleanroom air-filtration inspection finding?
Review the recorded method, instrument checks, operating conditions, acceptance criteria and supporting evidence with qualified personnel. Record the investigation and any approved corrective action under the facility procedure.
How should teams distinguish a filter finding from a room-classification issue?
Filter integrity, airflow visualization, particle monitoring, and room classification are distinct considerations. Your qualified team and approved procedures should confirm the root cause.