Solder Paste Smearing in SMT Printing: Causes and What to Check

Solder paste smearing occurs when paste spreads beyond the intended deposit during stencil printing. It can leave paste on the solder mask or between adjacent pads, increasing the risk of bridging and rework. The cause is not always the printer itself. A dirty stencil, poor board support, misalignment, unsuitable squeegee technique, or changes in paste […]
Preventing Solder Bridging in SMT Assembly

Preventing Solder Bridging in SMT Assembly Solder bridging is one of the most common defects in SMT assembly. It happens when excess solder accidentally creates a connection between two nearby pads or component leads, resulting in a short circuit. On densely populated PCBs, especially those with fine-pitch ICs, even a single bridge can cause the […]
Step-by-Step: Setting Up an Automatic SMT Stencil Printer for Your PCB Production Line

Step-by-Step: Setting Up an Automatic SMT Stencil Printer for Your PCB Production Line Before a single component is placed on your PCB, one process quietly determines whether your entire batch passes or fails: solder paste printing. A misaligned print, wrong squeegee pressure, or a skipped cleaning cycle can send hundreds of boards straight to rework. […]