A laboratory water purifier is a piece of equipment specially used in laboratories, which converts tap water or other water sources into high-purity water that meets laboratory requirements through a series of physical and chemical processes. These processes include pretreatment, reverse osmosis, ion exchange, ultrafiltration, UV sterilization, etc., to ensure that the quality of the final produced water meets or exceeds the standards required by the laboratory.
$0.00
Features:
1. Equipped with low-pressure and high-pressure protection functions.
2. Front-mounted water outlet, button-type water intake.
3. Dual UV Lamp(Optional).
4. Water-electricity separation design with high safety.
5. Online monitoring flowmeter, it records the water output throughout the entire consumable cycle.
6. With a flushing function to extend the service life of consumables.
7. 1-channel water quality detection, online monitoring of electrical conductivity, consumable life alarms for all levels.
Technical Parameters:
| Model | SCSJ-II-80LPro | |
| Water Output Type | RO water outlet*1 and DI water outlet* 2 | |
| Water Output Speed | 80L/H | |
| Purifying Procedure | PF+AC+RO+DI | |
| Water Supply Requirements | Municipal water, the inlet water pressure is 0.1~0.3MPa, and the water quality meets the requirements of GB57492, 5~40°C | |
| Environmental Requirements | Temperature: 15~35℃, relative humidity ≤80%; place near a water source, avoid strong sunlight, and keep it stable as the principle | |
| Purification System | 20″ PP filter*1
20″ Granular activated carbon filter*1 20″ Activated carbon block filter*1 400GDP RO membrane*2 Deionization column purification column*1 T33 filter(Optional) |
|
| DI Water Quality | Resistivity | 10~18.2MΩ.cm |
| Conductivity | 0.055~0.1μs/cm | |
| Absorbance(254 nm, 1 cm path length) | ≤0.001 | |
| Soluble Silicon(SiO2) | ≤0.01 | |
| Complies with Grade 1 water standard of GB 6682-2008(Standard for water used in laboratories) | ||
| RO Water Quality | Ion Rejection Rate | 96%~99% |
| Organic Rejection Rate | >99% | |
| Particles and Bacteria Rejection Rate | >99% | |
| Flow Rate | 3300ml/min(When the water tank is full of water) | |
| Consumption | 84W | |
| Power Supply | AC100~240V, 50/60Hz | |
| Standard Configuration | Main body, 40L water tank, accessory pack | |
| External Size(W*D*H) | 690*455*1125mm | |
| Package Size(W*D*H) | Instrument | 758*513*1277mm |
| Accessory Box | 605*315*165mm | |
| Gross Weight | 70kg | |
| Model | SCSJ-II-80LPro |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.