Åpplied Physics

A Leading Supplier in Pharmaceutical and Semiconductor Metrology Equipment

Applied Physics USA

Contamination Wafer Standards, Calibration Wafer Standards and PSL Calibration Wafers are NIST Traceable Calibration Standards using certified polystyrene microspheres or silica microspheres to calibrate the size accuracy of scanning surface inspection systems in semiconductor metrology applications. We specialize in spot deposition and full deposition on 100 mm to 300 mm ultraclean silica wafers, or customer’s wafers. Polystyrene particle size standards used to calibrate aerosol laser counters. Polystyrene puff beds used to fill furniture Poufs, floor pillows, ottomans, and throw pillows.

 

Our CRF6, CRF3 and CRF2 cleanroom foggers, 2001 cleanroom fogger and LN2 ultrapure foggers are used in air balance and smoke studies to visualize airflow turbulence in barrier isolators, bio-safety cabinets,clean rooms, etc. 2001 cleanroom foggers are used in smoke studies to visualize airflow and turbulence in clean rooms, ISO suites, sterile rooms, barrier isolators, RABs, BSCs and glove boxes. Compare clean room fogger performance for your smoke study. Our modern ultrapure foggers include adjustable airflow velocity control, adjustable fog volume and wireless remote control. We provide LN2 ultrapure foggers and ultrasonic foggers using only DI Water, WFI and sterile water.

 

Our LN2 ultrapure fogger introduces a totally pure fog for use in cleanrooms, pharmaceutical ISO suites. It includes a rolling trolley, replacing traditional carry handles of the older ln2 fogger designs. The AP35 and AP100 LN2 ultrapure foggers are the best tools for ultrapure fog providing airflow velocity control, fog volume control and wireless remote control with user friendly operation. By combining LN2 with DI water, sterile water or WFI water, an ultrapure fog vapor is produced in low to high volumes to visualize airflow turbulence in your smoke study.

 

We also provide the lower cost, lower fog volume CRF2, CRF3 and CRF6, portable cleanroom foggers; which use ultrasonic transducers to produce a pure fog for airflow visualization of turbulence in fume hoods ISO suites, sterile rooms, and to balance airflow between rooms and door openings. The CRF3 and CRF6 Cleanroom Foggers are produced with electro-polished, stainless steel enclosures and are our best selling foggers due to small size, adjustable fog volume, adjustable airflow and wireless remote control. The CRF6, CRF3 and CRF2 uses only DI water, sterile water or WFI water to produce an adjustable fog output that can be tuned to your dynamic airflow needs.

 

Our Decontamination and Sterilization machines help reduce unwanted pathogens in agriculture growth, to improve olive tree fruit production, and improve dairy production by drastically reducing pathogens that affect dairy production. Our Dry Foggers and portable, battery operated, Backpack Dry Fogger is used to sanitize rooms, buildings, tunnels, foods, food processing and agricultural growths by killing molds, yeasts, fungii, spores, coronavirus and Candida Auris fungus, which is a harmful form of yeast. Using all natural decontaminate liquids, our sanitizing foggers reduce harmful pathogens, providing remarkable production increases to dairy and food production.

Become an Authorized Dealer

Applied Physics is a leading global metrology supplier to pharmaceutical and semiconductor companies. Our products include Cleanroom Foggers, Polystyrene Microspheres, Particle Size Standards, Calibration Wafer Standards, Microbial Air Samplers, Graphene particle products. EPS Polystyrene Puffs are used to fill furniture Poufs, Beanbags, Floor pillows, Throw pillows, Ottomans and more.

Applied Physics has dealers to provide our line of products to their customers.

If your company is interested in becoming an authorized Applied Physics dealer, please click the button below to submit your application.

48v Backpack Fogger, Dairy Cattle & Food Growth

PBF-48 using PathAway Decontaminate kills pathogens in Olive Tree growth & improves Dairy production by nearly eliminating pink eye, calf cough and hairy foot wart.

CRF6, Portable Cleanroom Fogger provides adjustable airflow velocity and fog volume control with up to 2.0 cubic meters fog per minute through two 80mm fog outlets for ≈ 45 minutes, ≈ 213 ml fog density per minute providing 12 to 15 feet visible airflow using dual 80mm fog outlets. The CRF6 is ideal for smoke studies in clean rooms, ISO suites, sterile rooms, RAB, BSC, barrier isolators, glove boxes, etc. Touch pad control is provided, or optional wireless remote control is available to operate CRF6 behind a closed wall, inside a barrier isolator or glove box. No contamination emitted. The fog evaporates back to air we breathe, no clean room wipe down required. The CRF3 is a smaller version with a single 80mm fog outlet producing 0.89 cubic meters pure fog per minute.

CRF2, Cleanroom Fogger is a low cost fog generator producing 0.26 cubic meters fog per minute through one 60mm fog outlet for ≈ 50 minutes, ≈ 57 ml fog density per minute providing ≈ 6 feet visible fog for smoke studies using deionized, sterilized or WFI water to visualize airflow patterns and turbulence in flow hoods, glove boxes and fume hoods. No contamination emitted, fog evaporates back to air we breathe, no clean room wipe down required. CRF2 Cleanroom Fogger video

AP35, LN2 Cleanroom Fogger provides adjustable airflow and high volume, adjustable fog output, ≈ 5.5+ cubic meters fog per minute for ≈ 60 minutes, ≈ 571 ml fog density per minute using dual water heater to provide 20 – 30 feet visible fog with 35 L of LN2 + 5 L of (Deionized, Sterile or WFI) water for smoke studies in clean rooms, ISO suites, sterile rooms and medical rooms. Use touch pad control or optional wireless remote control for fogging behind a closed wall. Since 2001 portable cleanroom foggers have provided ultrapure, breathable fog with no clean room wipe down required. AP35 Ultrapure LN2 Fogger video

Polystyrene Latex Beads, latex spheres, Microspheres and Particle Size Standards are NIST Traceable, certified particle size standards produced as polystyrene microspheres from 20 nm to 160 µm. Polystyrene Latex Microspheres and polystyrene latex spheres are highly accurate, particle size standards with a narrow size distribution, suspended in a DI Water solution with a trace surfactant to minimize agglomeration. Dry Polystyrene particles also available. Polystyrene latex beads are used to create particle aerosol challenge for size calibration of laser particle counters, and to produce Calibration Wafer standards.

Silica Microspheres are NIST Traceable, silica calibration particle standards provided from 30 nm to 2500 nm. Silica nanoparticles are used in Pharmaceutical applications and used to deposit Contamination Wafer Standards. Silica CV is typical 3% in size distribution. Silica microspheres are diluted with 15ml ethanol or De-Ionized water, based on customer needs. Dry Silica particles are also available from 100 nm to 2500 nm, from 1 gram to 10 Kg per volume.

Calibration Wafer Standards are certified, NIST traceable, absolute wafer standards deposited with monodisperse, polystyrene latex microspheres at particle diameters of 30 nm to 12 microns. Particle counts deposited are typically between 2000 and 20000 counts on the wafer surface. Spot Depositions can be 1 to 8 particle size peaks deposited around the wafer, depending on the wafer diameter. Calibration Wafer Standards are used to calibrate the size accuracy of scanning surface inspection systems (SSIS), such as Tencor 6200, Tencor 6220, Tencor 6400 and 6420, KLA and Tencor SP1, SP2 and Hitachi wafer inspection tools.

Silica Contamination Wafer Standard are certified, NIST traceable, contamination wafer standards deposited with monodisperse, silica microspheres at particle diameters of 50 nm to 2500 nm ( 2.5 µm). A Silica Contamination Wafer Standard is typically deposited as a full deposition across the wafer; but can be deposited with up to 8 silica size peaks deposited as spot depositions around the wafer standard. Each silica particle size has a narrow size distribution of 3% or less. Silica Contamination Wafer Standards are provided with a NIST Traceable, Size Certificate, and are used to calibrate the size accuracy of scanning surface inspection systems (SSIS) using high powered lasers; such as KLA and Tencor SP2, SP3, SP5, SP5xp, KLA and Hitachi wafer inspection tools.

AP100, Ultrapure LN2 Fogger is the highest fog volume, adjustable flow fogger, producing ≈ 15.5 cubic meters ultrapure fog per minute, ≈ 90 minutes operation, ≈ 1520 ml fog density per minute using dual water heaters to provide 30 to 40 feet visible fog using 100 L of LN2 + 10 L of (Deionized, Sterile or WFI) water for smoke studies in large clean rooms, or used to produce large volumes of stage and theatric fog fog. Four fog hose outputs are provided for smoke studies in clean rooms, ISO suites, sterile rooms, medical rooms; and ultrapure fog for theatrical stage fog. Use touch pad control and wireless remote control for operation at a distance. No contamination emitted, fog evaporates back to air we breathe, no clean room wipe down required.

P100 Portable Microbial Air Sampler With its superior functionality and key benefits, the NEW P100 Portable Microbial Air Sampler from Applied Physics is destined to be the industry standard for microbial air sampling. The P100 Microbial Air Sampler offers two CPU controlled sampling rates, 28.3 LPM (1 CFM), and 100 LPM, to allow for continuous monitoring of critical processes, or to take quick cubic meter “grab samples”.

Portable Backpack Dry Fogger, PBDF-48 is a battery operated, backpack, dry fogger with an 8 liter water cavity, which allows mixing with your preferred, water soluble, disinfectant liquid to disinfect your enclosed areas in a rapid manner. The BackPack Fogger operates at 10-15 micron droplet output, making it the only portable Dryfogger with true portability. The Portable Backpack Dry Fogger, PBDF, provides a remote power on switch on the fog hose, so that you can easily turn power on/off as needed. The PBDF allows your trained staff to quickly sanitize rooms, hallways, entry / exit points with your preferred disinfectant, such as Hypochlorous acid anitizing liquid, mixed with pure water at the concentration that you desire in a total of 8 liters liquid. Typical use of the PBDF-48 is to kill dangerous pathogens such as spores, fungii, molds, coronavirus and yeasts such as Candida Auris, a harmful yeast that invades the lungs, blood and brain.

The PBF-48 Portable Backpack Fogger is quite capable of sanitizing rooms and offices using an “All Natural” sterilant, which is capable of killing viruses, coronavirus, spores, molds and fungii on contact. It is most often set up with a 15 micron fog output to support agricultural plant and tree leaf applications; or can be set up with 35 micron fog for surface contact killing of critical unwanted bio-organisms in plant life, such as killing a harmful banana fungus in South America called Tropical Race 4, TP4. The PBF-48 and PBF-24 is used with cattle to mitigate Hairy Foot Warts in dairy and beef cattle, improving beef and dairy production.

The WMF Wall and Table Decontamination Fogger is a truly self-contained unit  capable of sanitizing rooms and offices using an “All Natural” sterilant, which is capable of killing viruses, coronavirus, spores, molds and fungii on contact. It is most often set up with a 15 micron fog output to support a dry fog in office or home environments; or can be set up with 35 micron fog for surface contact killing of critical unwanted bio-organisms

The WMF2 Wall and Table Decontamination Fogger is an upgraded AC unit with a more powerful motor. This unit is ideal for heavier and more continuous use. When used with the all natural solution it is capable of killing viruses, coronavirus, spores, molds and fungii on contact. It is most often set up with a 15 micron fog output to support a dry fog in office or warehouse environments; or can be set up with 35 micron fog for surface contact killing of critical unwanted bio-organisms.

Polystyrene EPS Beads are around 10mm in diameter, about 0.4″, sold by the truckload in plastic bags containing around 50 cubic feet per bag. Puff beads are used to fill furniture Poufs, Beanbags, Throw Pillows, Ottomans and Floor pillows for home/office applications. EPS beads are CFC-free and meet the new RoHS (Restriction of Hazardous Substances).

Trusted Partners

PRODUCT SUMMARIES

Cleanroom Fogger, CRF6 Fogger, DI water fogger, LN2 Ultrapure Fogger, LN2 Fogger and Portable Cleanroom Fogger are used to visualize airflow in smoke studies by visually describing airflow patterns, dead zones and turbulence in clean rooms, sterile rooms, barrier isolators, RABS, glove boxes and ISO suites. Guidelines for ISO 14644-3 ANNEX B7, USP 797 Insitu Airflow Analysis, Airflow Recovery and Semiconductor clean rooms are supported. The CRF6 and CRF3 Cleanroom foggers are the best selling, portable clean room fogger. The CRF6 provides 2 cubic meters pure fog per minute, while the CRF3 provides about 0.89 Cubic meters per minute.  Both foggers are very easy to operate using only WFI, Deionized or Sterile water to generate fog with adjustable fog controls and optional wireless remote control. The AP35 Ultrapure Fogger produces 5.5+ cubic meters fog per minute with 571 ml of fog density per minute to provide 20-30 feet of visual airflow. The CRF2 is the lowest cost fogger available producing 0.26 cubic meters fog per minute with 57 ml fog density to provide about 6 feet of visible airflow in fume hoods and barrier isolators. The CRF4 is a mid range fogger providing 1.25 cubic meters of fog per minute with 187 ml of fog density to visualize airflow for 10 to 15 feet in small clean rooms. The AP100 is a high volume fogger with 15.5 cubic meters per minute at 1520 ml fog density providing 30 feet of visual airflow in large clean rooms and stages. Cleanroom ultrapure foggers, called LN2 foggers, produce the highest volumes of ultra pure fog with adjustable fog volume, adjustable airflow and wireless remote control. Fogger performance comparison of LN2 fogger, CRF6 fogger and DI water foggers. You can determine which fog generator fits the requirements of your smoke studies. Clean room foggers support airflow visualization as defined by USP797, ISO 14644-3, Annex B7; Federal Standards 209E, ISO Standard 14644-1 and 14644-2. Airflow recovery testing at 100:1 recovery time is also supported with the CRF2 or CRF4 Cleanroom Fogger as defined in ISO 14644-3, B12. These tools are often referred to as a smoke generators or smoke machines; used in smoke studies of airflow turbulence in sterile rooms, ISO suites, medical operating rooms, bio-safety cabinets, barrier isolators, glove boxes and clean rooms. Applied Physics also provides calibration wafer standards, silica contamination wafer standards, polystyrene microspheres and silica particle size standards. Sanitizing Foggers can decontaminate 99.997% of yeast, viruses, envelope viruses, mold, fungi and bacteria. Contact Applied Physics, Inc. at TEL: 1-719-428-4042. Clean Room Foggers Link

Applied Physics USA

Cleanroom Fogger use in Smoke Studies

CRF4 Cleanroom Fogger

Portable Cleanroom Fogger

Cleanroom foggers are smoke generators used in smoke studies to visualize airflow and turbulence with a pure fog supporting USP 797, ISO 14644 and Federal Standards guidelines in clean rooms, sterile rooms and ISO suites. The CRF6 Cleanroom Fogger provides 213 ml fog density per minute with a fog volume of about 2.0 cubic meters per minute for up to 45 minutes operation providing 15 feet of visible airflow for smoke studies and 3D airflow modeling in clean rooms, ISO suites, medical rooms and sterile rooms. The CRF2 Cleanroom Fogger and CRF6 Cleanroom Fogger provide lower cost operation in smoke studies to visualize clean room airflow.

CRF2 and CRF6 Clean Room Fogger Information

Applied Physics USA

Ultrapure Cleanroom Fogger in Smoke Studies, LN2 Fogger

AP35 Ultrapure Fogger

Portable Cleanroom Ultrapure Fogger

Ultrapure foggers combine LN2 with deionized water, sterile water or WFI water to produce high volumes of ultrapure fog for smoke studies, supporting USP 797 guidelines, ISO 14644-3 and Federal Standards in clean rooms, sterile rooms and ISO suites. The AP35, Ultrapure Cleanroom Fogger provides 571 ml per minute fog density with a fog volume of up to 5.5+ cubic meters per minute for up to 60 minutes with 20 to 30 feet of visible airflow for smoke studies and 3D airflow modeling. 3X more fog volume, 2X more fog density and 2X more airflow travel distance, costs nearly the same as traditional LN2 foggers. The AP100, LN2 Cleanroom Fogger provides 15.5 cubic meters fog per minute at 1520 ml fog density for the largest clean rooms, sterile rooms and ISO suites; and stage fog for theatrical stage fog use. The AP35 and AP100 are provided with electro-polished, stainless steel enclosures.

AP35 Ultrapure Fogger Information

Applied Physics USA

Polystyrene Microspheres, Particle Size Standards and Polystyrene Puff Beads

Applied Physics USA

Particle Size Standards, 20nm to 160 microns

Polystyrene Latex Spheres and polystyrene latex beads are provided with 1% concentration or less in 15ml DI Water for use as particle size standards and aerosol particle challenges. A trace of surfactant is included in each bottle to reduce agglomeration. Surf-Cal, pre-mixed PSL Spheres are provided in 50ml bottles at 1E10 concentration. 1 um to 160 um PSL Spheres are available in 15ml of DI Water Solution and typically used for instrument size calibration. Dry Polystyrene spheres are avaialbe from 3 -750 microns. Polystyrene Puff Beads are used to fill furniture Poufs, Throw pillows, Floor Pillows, etc.

20 nm to 900 nm Polystyrene Latex Beads, Polystyrene Latex Microspheres, PSL Spheres Information

Applied Physics USA

Calibration Wafer Standard

Calibration Wafer Standard

PSL Wafer Standard

Calibration Wafer Standards are produced on Prime Silicon Wafers, your FILM Wafers or bare masks. NIST traceable, polystyrene latex particles are used to produce, Calibration Wafer Standards from 40 nm to 12 microns on 100 mm to 300 mm wafers. Calibration wafer standards are used for size calibration of KLA-Tencor Surfscan SP1, SP2, SP3, SP5, SP5xp; Tencor 6200, 6400 and 6420 systems; Topcon, ADE and Hitachi wafer inspection systems. These particle wafer standards are NIST Traceable with Size Certificate provided with a single size peak deposited as FULL Wafer Deposition across the wafer or deposited with 1 to 4 polystyrene latex particle size peaks, deposited as spot depositions around the prime silicon wafer, film wafer, glass substrate or photo mask surface.

Calibration Wafer Standard Information

Applied Physics USA

Silica Particle Size Standards

Silica Microspheres

Silica Particle Size Standards

Silica particles with 10% concentration in 15ml for use as NIST Traceable, silica particle size standards and aerosol particle challenges. Silica is produced as spherical particles, 3% or less in size distribution from 40 nm to 2000 nm in 10% concentration, available in 15 ml, 100 ml, 500 ml and 1000 ml volumes. Silica particles at 102 nm or below are mixed in an ethanol alcohol solution to minimize agglomeration; while silica particles over 102 nm are mixed in Deionized water. No surfactants are used. SiO2 particle sizes at 60 nm, 102 nm, 269 nm and 895 nm are similar to NIST SRMs at same sizes. Functionalized silica and hydrophobic silica is also available in 1 Kg increments up to 1000 Kg. Bulk, Dry Powder silica is used in commercial silicate, filler in polymers, CMP slurries, nano-composites, high pressure liquid chromatography and mesoporous silica particles (MSN).

Silica Nanoparticles and Particle Size Standards Information

Applied Physics USA

Contamination Wafer Standard using Silica Microspheres, Particle Wafer Standard

Contamination Wafer Standard

Silica Contamination Wafer Standard

Contamination Wafer Standards are produced on Prime Silicon Wafers, your film wafers or blank masks. NIST traceable, Silica nanoparticles are used to produce Contamination Wafer Standards.  Particle Wafer Standards are deposited with silica particles, NIST Traceable from 30 nm to 2.5 um, deposited on 150 mm to 300 mm wafers, used to calibrate KLA-Tencor Surfscan SP2, SP3, SP5, SP5xp; Tencor 6200, 6400 and 6420 systems. These contamination wafer standards are provided with Size Certificate as a single size fulle deposition, or upto 8 sizes as a SPOT Deposition around the wafer Standard. Applied Physics can produce any silica size peak between 30nm and 2500nm and deposit from 1 to 8 silica sizes around a 300mm prime silicon wafer surface or 4 silica sizes around a 150mm blank photo mask.

Silica Calibration Wafer Standard Information

Latest Publications

Coronavirus, COVID-19: DF2S Dry Fogger

Coronavirus, COVID-19: DF2S Dry Fogger

Covid 19 We recently have seen an significant increase in inquires of the DF2S Dry fog sterilization fogger and the Mini Dryfog Disinfectant Machine with the recent outbreak off the Coronavirus and folks looking for a COVID-19 solution. The DF2S was tested years ago...

The Fog Pistol

The Fog Pistol

The Fog Pistol The Portable Glycol Fogger, also known as a fog pistol, is used in Industrial clean rooms to visualize airflow leaks and locate turbulence. It is a hand held fogger with battery operation and is used in small industrial areas where airflow leaks need to...

%

ACCURACY

%

SUCCESS-RATE

%

BETTER DATA

%

COST-EFFECTIVE

Translate »